Differences in indentation and wear behaviors between the two sides of thermally tempered soda lime silica glass

Thermal tempering is an industrial process widely used to make soda lime silica (SLS) glass panels stronger and tougher. During the tempering process, the upper and bottom sides of the glass may experience different cooling rates, and thus, their properties could be different. This study characterized changes in surface composition and subsurface glass network structures as well as indentation and wear resistance properties of the air- and tin-sides of 6-mm-thick SLS window panels faced toward the upper and sliding roller sides during thermal tempering. The results showed that although the chemical and structural differences detected with X-ray photoelectron spectroscopy and specular reflection infrared spectroscopy are subtle, there are large differences in nanoindentation behaviors and mechanochemical wear properties of the SLS glass surface. The findings of this study provide further insights into the performance difference between the air- and tin-sides of the SLS glass panel treated with thermal tempering.     

Psoriasis and Gut Microbiome—Current State of Art

Psoriasis is a chronic, immune-mediated inflammatory disease that affects around 125 million people worldwide. Several studies concerning the gut microbiota composition and its role in disease pathogenesis recently demonstrated significant alterations among psoriatic patients. Certain parameters such as Firmicutes/Bacteroidetes ratio or Psoriasis Microbiome Index were developed in order to distinguish between psoriatic and healthy individuals. The “leaky gut syndrome” and bacterial translocation is considered by some authors as a triggering factor for the onset of the disease, as it promotes chronic systemic inflammation. The alterations were also found to resemble those in inflammatory bowel diseases, obesity and certain cardiovascular diseases. Microbiota dysbiosis, depletion in SCFAs production, increased amount of produced TMAO, dysregulation of the pathways affecting the balance between lymphocytes populations seem to be the most significant findings concerning gut physiology in psoriatic patients. The gut microbiota may serve as a potential response-to-treatment biomarker in certain cases of biological treatment. Oral probiotics administration as well as fecal microbial transplantation were most reported in bringing health benefits to psoriatic patients. However, the issue of psoriatic bacterial gut composition, its role and healing potential needs further investigation. Here we reviewed the literature on the current state of the relationship between psoriasis and gut microbiome.     

Application limits and sensitisation behaviour of the manganese- and nitrogen-alloyed austenitic stainless steel P2000 (X13CrMnMoN18-14-3)

Nickel-free high-nitrogen-alloyed stainless steels like the P2000 (X13CrMnMoN18-14-3) were developed to enhance the strength and corrosion resistance of austenitic stainless steels like 304 and 316 while keeping the typical high ductility. The mechanical and corrosive properties of P2000 were investigated and compared with 304 and 316 to highlight the application opportunities of this new alloy. The microstructure of the solution-annealed condition was characterised by electron backscatter diffraction and the mechanical properties were studied by uniaxial tensile tests, Charpy impact tests and hardness measurements. The passivation behaviour was analysed using the electrochemical potentiodynamic reactivation, whereas the pitting corrosion resistance was compared by pitting potentials and pitting temperatures. However, secondary thermal influences or suboptimal heat treatment can impair the corrosion resistance due to the precipitation of secondary phases and the resulting sensitisation. Thermodynamic calculations and artificial ageing treatment in the range of 500–900°C for up to 100 h were used to determine critical time–temperature parameters for sensitisation. The microstructure of the various aged states was evaluated by scanning electron microscopy and compared with the degrading corrosion resistance characterised by the KorroPad method.     

Investigation of the piezoelectric and anti-reduction properties of (Ba,Ca) (Ti,Sn, Hf) textured ceramics prepared under low oxygen partial pressure conditions at low sintering temperatures

Multilayer piezoelectric ceramics must be sintered in a reducing atmosphere, preventing oxidation of the inner base metal. Plate-like textured (Ba, Ca)(Ti, Sn, Hf)O₃ ceramics with a <001> preferred orientation were successfully developed at a low oxygen partial pressure (PO₂:10^?8 atm) using a BaTiO₃ (BT) template with sintering temperatures < 1300 °C, which is beneficial for multilayer applications using base metal co-firing with ceramics. When adding the 3 wt% BT template, the proposed samples had a Lottgering factor of 84 %, piezoelectric coefficients d₃₃ = 324 pC/N, -d₃₁ = 122 (pC/N), and Q_m = 452, and the strain values increased from 0.07 % for the randomly oriented ceramics to 0.115 % at 20 kV/cm for the textured ceramics, confirming that the texturing behavior assisted the grain growth and improved both the soft and hard behaviors and insulation resistance of the proposed lead-free ceramics. These findings make a significant contribution to the production of high-power piezoelectric components.     

发酵乳杆菌HCS08-005耐逆性及对体外细胞免疫调节作用的研究

目的 研究发酵乳杆菌(Lactobacillus fermentum) HCS08-005耐逆性及对体外细胞的免疫调节作用。方法 考察发酵乳杆菌HCS08-005的耐酸耐胆盐能力，并应用发酵乳杆菌HCS08-005细胞裂解物，处理小鼠单核巨噬细胞RAW264.7和小鼠脾脏细胞，用酶联免疫吸附测定试剂盒检测各类炎症因子包括肿瘤坏死因子-α (tumor necrosis factor-α，TNF-α)、白细胞介素-2 (inter-leukin-2，IL-2)、白细胞介素-12 (inter-leukin-12，IL-12)、γ干扰素(interferon-γ，IFN-γ)的表达水平。结果 显示发酵乳杆菌HCS08-005有较好的耐逆性，能够耐受酸和胆盐环境到达肠道发挥作用。不同浓度的发酵乳杆菌HCS08-005细胞裂解物对小鼠脾脏细胞和巨噬细胞分泌炎症因子均有极显著影响(P<0.01)，在质量浓度为100 μg/g时，IL-2分泌量为421.49 pg/g，TNF-α分泌量为161.23 pg/g，IFN-γ分泌量为846.14 pg/g，IL-12分泌量为12.88 pg/g，因子水平极显著提高(P<0.01)。结论 在体外细胞试验中，发酵乳杆菌HCS08-005有较好的耐逆性，对体外细胞有免疫调节作用。     

Improving the corrosion resistance of a-C:H film by a top a-C:H:Si:O layer

During the deposition of a-C:H film, defects (pinholes or discontinuities) caused by excessive stress will inevitably appear, which will reduce the corrosion resistance of the a-C:H film. In this study, top a-C:H:Si:O layers (thickness of approximately 0.3 μm) on the surface of a-C:H films were deposited on a large scale by PACVD technology using acetylene (C₂H₂) and/or hexamethyldisiloxane (HMDSO) as reactants, to improve the corrosion resistance of a-C:H films while ensuring the appropriate overall hardness of the films. The corrosion behaviors of the films were studied by electrochemical impedance spectroscopy (EIS) and Tafel polarization. We found that the a-C:H/a-C:H:Si:O films possess a lower electrolyte penetration rate due to their stronger capacitance characteristics. In addition, the corrosion current density of the a-C:H/a-C:H:Si:O films (10^?10 A cm^?2) were reduced by 2 orders of magnitude compared to the a-C:H film (10^?8 A cm^?2), and by 3 orders of magnitude compared to 316 stainless steel (10^?7 A cm^?2). The impedance results obtained by EIS were simulated using appropriate equivalent circuits, and the corresponding electrical parameters were used to further verify the electrochemical protection behavior of the top a-C:H:Si:O layer.     

Infrared radiation and thermal cyclic performance of a high-entropy rare-earth hexaaluminate coating prepared by atmospheric plasma spraying

In this study, a high-entropy RMgAl₁₁O₁₉ (HE-RMA, R = La, Pr, Nd, Sm, Gd) and LaMgAl₁₁O₁₉ (LMA) coatings were fabricated by atmospheric plasma spraying. The phase composition, microstructure, thermal stability, infrared emissivity performance and shock resistance were comparatively characterized. The results showed that doping multiple rare-earth cations could be conductive to enhance the infrared emissivity. The as-sprayed HE-RMA coating exhibited the highest infrared emissivity, which reached up to 0.971 at 1000 °C. The reason for the improvement of the infrared emissivity was attributed to introduced impurity energy level resulting from doping cations, which could reduce the forbidden bandwidth and increase probability of electronic transition. Meanwhile, HE-RMA coating exhibited better shock resistance at 1100 °C due to superior fracture toughness (1.84 ± 0.41 MPa·m^1/2) during thermal cycling test at 1100 °C. In addition, HE-RMA coating still exhibited high infrared emissivity (0.932 at 1000 °C) at 1100 °C annealing for 100 h with only a slight reduction.     

Characterization of anisotropic gas permeability and thermomechanical properties of highly textured porous alumina

Porous alumina with a highly textured microstructure was fabricated by pulse electric current sintering (PECS) using alumina platelets. Highly oriented porous alumina with a porosity of 3%–50% was obtained by a pressure-controlled method of PECS. The properties of the highly textured porous alumina were measured in two directions. The nitrogen gas permeance and thermal conductivity at room temperature were higher in the direction along the platelet length due to the higher continuity of pores and the connectivity of alumina platelets, respectively. The anisotropy of the thermal conductivity at room temperature was investigated and explained by the effect of grain size of platelets as well as morphology and orientation of pores. The bending strength was higher with the loading direction along the platelet thickness. The thermal shock strength was clearly different in the two directions. The difference in the thermal shock strength was investigated by the measurement of properties and thermal stress analysis.     

Research and development of liquid hydrogen (LH2) temperature monitoring system for marine applications

Monitoring the temperature in liquid hydrogen (LH₂) storage tanks on ships is important for the safety of maritime navigation. In addition, accurate temperature measurement is also required for commercial transactions. Temperature and pressure define the density of liquid hydrogen, which is directly linked to trading interests. In this study, we developed and tested a liquid hydrogen temperature monitoring system that uses platinum resistance sensors with a nominal electrical resistance of approximately 1000 Ω at room temperature, PT-1000, for marine applications. The temperature measurements were carried out using a newly developed temperature monitoring system under different pressure conditions. The measured values are compared with a calibrated reference PT-1000 resistance thermometer. We confirm a measurement accuracy of ±50 mK in a pressure range of 0.1 MPa–0.5 MPa.